A nice entrance is important for your company. It is the first impression visitors get of your company. This means a proper counter is needed to give that great first impression.
A COUNTER SYSTEM FOR A GREAT FIRST IMPRESSION
- A counter system for every purpose
- Tailor made
- Can be used in store for over the counter sales as a well as a reception area
COUNTER SYSTEM SPECIFICATIONS
- Frame height (excl. countertop) : 1.000 / 1.100 mm
- Standard frame depth: 600 mm
- Standard countertop depth: 800 mm
- Length per unit: 996 mm
Counter system frames
The frames are made from loose uprights that are connected with traverses. The uprights are made from perforated tubes ( 50 x 25 x 1,25 mm). These perforation allow you to clip in the shelves every 50 mm in height. We use footplates underneath the tubes to spread out the load evenly over the floor and filler plates to take care of slight height differences in the floor.
Surface treatment of the counter system
The uprights are degreased, fosfated and epoxied.
Countertops and side cladding
The standard countertop is a 29 mm softline chipboard with a light grey (RAL 7035) finish. The front and sides of the counter are fitted with steel side cladding finished with a light grey ( RAL 7035) hammered finish.
Counter system shelves
The shelves are made from cold-rolled steel and are available with either a galvanized or epoxy finish.
The counter system can be set-up as a straight counter, or you can use our corner pieces to create L- or even U-shaped counters. To gain maximum efficiency from your counter, you can complete it with our extensive range of accessories e.g. doors, drawers, plastic bins, shelf dividers and many more. For more information please visit our accessories page.